L2MGC

Liste des publications ACL

Articles dans des revues internationales ou nationales avec comité de lecture répertoriées dans les bases de données internationales (ISI Web of Knowledge, Google Scholar, Harzing Publish or Perish, Pub Med…).

2016

L. Chaabane, E.H. Kadri, Y. Sebaibi, H. Soualhi ²
"Dune sand and pumice impact on lightweight mechanical and thermal concrete properties."
² Construction and building Materials, Accepté 2016.

B. Benabed, H. Soualhi, Ase Belaidi, L. Azzouz, E.H. Kadri, S. Kenai
²Effect of limestone powder as a partial replacement of crushed quarry sand on properties of self-compacting repair mortars²
Journal of Building Materials and Structures. Volume 3, Issue 1, pp 15-30, 2016.

J. C. Bidoung, P. Pliya, P. Meukam, A. Noumowé, T. Beda
Behaviour of clay bricks from small-scale production units after high temperature exposure.
Materials and Structures, Vol. XX, 2016.

M. Guendouz, F. Debieb, O. Boukendakdji, E.H. Kadri, M. Bentchikou, H. Soualhi.
²Use of plastic waste in sand concrete².
Journal of Materials and Environmental Science. Volume 7, Issue 2, pp382–389, 2016.

I. Irki, F. Debieb, E.H. Kadri, O. Boukendakdji, M. Bentchikou, H. Souali
²Effect of the length and the volume fraction of wavy steel fibers on the behavior of self-compacting concrete²
Journal of Adhesion Science and Technology, pp 1-14, 2016.

C. Laneyrie, A.-L. Beaucour, M. Green, R. Hebert, B. Ledesert, A. Noumowé
Influence of recycled coarse aggregates on normal and high performance concrete subjected to elevated temperatures,
Construction & Building Materials. Vol. 111, 2016.

P. Lopez-Arce, M. Tagnit-Hammou, B. Menendez, J.D. Mertz, M. Guiavarc’h, A. Kaci, S. Aggoun, A. Cousture
Physico-chemical stone-mortar compatibility of commercial stone-repair mortars of historic buildings from Paris
Construction and Building Materials, Volume 124, 15 October 2016, Pages 424–441

R. Niry Razafinjato, A.-L. Beaucour, R. Hebert, B. Ledesert, R. Bodet, A. Noumowé
High Temperature behaviour of a wide petrographic range of siliceous and calcareous aggregates for concretes,
Construction & Building Materials, Vol. 123, 2016

O. Taleb, F. Ghomari, M. Boukli hacene, E.H. Kadri, H. Soualhi
²Effect Formulation and rheology of eco-self-compacting concrete (Eco-SCC)²
Journal of Adhesion Science and Technology, pp 272-296, 2016.

H. Thong, E.H. Kadri, A. Kaci, T. T. Ngo, A. Trudel, S. Lecrux
²Advanced online water content measurement for self-compacting concrete production in ready-mixed concrete plants²
Construction and building Materials, Vol 112, pp 570–580, 2016.

Z. Makhloufi, S. Aggoun, B. Benabed, E.H. Kadri,
²Effect of magnesium sulfate on the durability of limestone mortars based on quaternary blended cements²
Cement Concrete and Composites, Vol. 65, pp186–199, 2016.

R. Siddique, V. Nanda, E.H. Kadri, I. Khan
²Influence of bacteria on compressive strength and permeation properties of concrete made with cement baghouse filter dus²
Construction and building Materials, Vol 106, pp 461–469, 2016.

H. Soualhi, E.H. Kadri, T.T. Ngo, A. Bouvet, F. Cussigh, Z. Tahar
²Design of portable rheometer with new vane geometry to estimate concrete rheological parameters²
Journal of Civil Engineering and Management. pp 1-9, 2016.

N. Yermak, P. Pliya, A.-L. Beaucour, A. Simon, A. Noumowé
Influence of steel and/or polypropylene fibres on the behaviour of concrete at high temperature: spalling, transfer and mechanical properties.
Construction & Building Materials, Vol. XX, 2016.

 

2015

 G. Adegoloye, A.-L. Beaucour, S. Ortola, A. Noumowé
Concretes made of EAF slag and AOD slag aggregates from stainless steel process: mechanical properties and durability.
Construction and Building Materials, Vol. 76, 2015.

A.S. Belaidi, S. Kenai, E.H. Kadri, H. Soualhi, B. Benchaa
²Effects of experimental ternary cements on fresh and hardened properties of self-compacting concrete²
Journal of Adhesion Science and Technology, pp 247-261, 2015.

H. Fares, H. Toutanji, K. Pierce, A. Noumowé
Lightweight Self-consolidating Concrete Exposed to Elevated Temperature,
ASCE's Journal of Materials in Civil Engineering, Vol. 27, Issue 12, 2015.

S. Grousset, F. Kergourlay, D. Neff, E. Foy, J.-L. Gallias, S. Reguer, P. Dillmann, A. Noumowé
In situ monitoring of corrosion processes by coupled micro-XRF/micro-XRD mapping to understand the degradation mechanisms of reinforcing bars in hydraulic binders from historic monuments,
Journal of Analytical Atomic Spectrometry, 2015.

Q.G. Hoang, A. Kaci, E.H. Kadri, J.L. Gallias
²Influence of recycled sand and gravel on the rheological and mechanical characteristic of concrete²
Construction and building Materials, Vol 96, pp 119–126, 2015.

H.D. Le., E.H. Kadri, G. De Schutter, S. Aggoune
²Effect of lubrification layer on velocity profited of concrete in a pumping pipe²
Materials and Structures, pp 3991- 4003, 2015

E.R. Lopez-Villaverde, S. N. Vu, M. K. Nguyen, A. Noumowé
A new Compton scattered tomography modality and its application to material non-destructive evaluation.
International Refereed Journal of Engineering and Science (IRJES), Vol. 4, Issue 1, 2015.

Z. Makhloufi, M. Chettih, M. Bederine, E.H. Kadri, M. Bouhicha
²Effect of quaternary cementitious systems containing limestone, blast furnace slag and natural pozzolan on mechanical behavior of limestone mortars²
Construction and Building Materials, Vol 95, pp 647–657, 2015.

C. Settari, F. Debieb, E.H. Kadri, O. Boukendadji
²Assessing the effects of recycled asphalt pavement materials on the performance of roller compacted concrete²
Construction and building Materials, Vol 101, pp 617–621, 2015.

H. Soualhi, E.H. Kadri, T.T.Ngo, A. Bouvet, F. Cussigh, B. Benabed
²Rheology of ordinary and low-impact environmental concretes²
Journal of Adhesion Science and Technology., Vol 29 N°20, pp 2160-2175, 2015.

Z. Tahar, E.H. Kadri, T.T.Ngo, A. Bouvet, A. Kaci
²Influence of recycled sand and gravel on the rheological and mechanical characteristic of concrete²
Journal of Adhesion Science and Technology, pp 392–411, 2015.

C. Walbert, J. Eslami, A.-L. Beaucour, A. Bourges, A. Noumowé
Evolution of the mechanical behaviour of limestone subjected to freeze-thaw cycles.
Environmental Earth Sciences, Vol. 74, Issue 7, 2015.

Z. Xing, A.-L. Beaucour, R. Hebert, A. Noumowé, B. Ledesert
Aggregate's influence on thermophysical concrete properties at elevated temperature.
Construction & Building Materials, Vol. 95, 2015.

 

2014

M. Adjoudj, K. Ezziane, E.H. Kadri, T.T. Ngo, A. Kaci
²Evaluation of rheological parameters of mortar containing various amounts of mineral addition with polycarboxylate superplasticizer²
Construction and Building Materials, Vol 70, pp 549–559, 2014.

B Benchaa, L. Azzouz, E.H. Kadri, S. Kenai,
²Effect of fine aggregate replacement with desert dune sand on fresh properties and strength of self-compacting mortars²
Journal of Adhesion Sciences and Technology, Vol. 28, issue 21, pp 2128–2195, 2014.

S.E Bensebti, S. Aggoun, E.H. Kadri, O. Haddad
²Experimental Test for Evaluation of SCC Static Segregation²
Advances in Materials Research, Doi 10.4028/www.scientific.net/AMR Vol 875-877, pp 68-76, 2014.

T. Boubekeur, K. Ezziane, E.H. Kadri
²Estimationof mortars compressive strength at different curing temperature by the maturity method²
Construction and Building Materials, Vol 71, pp 299–307, 2014.

D. Boucherit, S. Kenai, E.H. Kadri, J. Khatib
²Simplified model for the prediction of long term concrete drying shrinkage²
KSCE Journal of Civil Engineering, pISSN 1226-7988, eISSN 1976-3808, www.springer.com/12205, pp 2196-2208, 2014.

A.P.G. Ferreira, M.C.R. Farage, F.S. Barbosa, A. Noumowé, N. Renault
Thermo-hydric analysis of concrete-rock bilayers under fire conditions,
Engineering Structures, Vol. 59, 2014.

Y. Ke, S. Ortola, A.L. Beaucour, H. Dumontet
Micro-stress analysis and identification of lightweight aggregate’s failure strength by micromechanical modeling.
Mechanics of Materials, 68 (2014) 176–192.

S. Kenai, B. Menadi, A. Debbih, E.H. Kadri
²Effect of Recycled Concrete Aggregates and Natural Pozzolana on Rheology of Self-Compacting Concrete²
Key Engineering Materials, Vol 600, pp 256-263, Tran Tech Publications, Switzerland, 2014.

C.T. Mai, E.H. Kadri, T.T. Ngo, A. Kaci
²Estimation of pumping pressure from concrete composition based on the identified tribology parameters
Advances in Materials Sciences and Engineering, pp 1-18, ID 503850, 2014

Z. Makloufi, M. Bederinaa, M. Bouhicha,E.H. Kadri,
²Effect of mineral admixtures on resistance to sulfuric acid solution of motars with quaternary binders²
Physics Procedia Vol 55 pp 329-335, doi: 10.1016/j.phpro.2014.07.048, Science Direct, 2014.

D. Mouhtadi, A. Amahmid, M. Hasnaoui, E.H. Kadri et R. Bennacer
²Analysis of the validation of a constant surface heat flux model for the case of blocks submitted to uniform volumetric heat generation and periodically mounted on the lower wall of the horizontal channel²
Numerical Heat Transfer, part-A-Applications Vol 65, issue 1, page 26-47, 2014.

D. Mouhtadi, R. Bennacer, A. Amahmid, M. Hasnaoui, O. Rahli, E.H. Kadri
²Three-dimensional simulation of natural convection induced by a heating block mounted on the lower wall of a cubical cavity²
Physical and Chemical News, Vol 72, pp 01–10, 2014.

L. H. Nguyen, A.-L. Beaucour, S. Ortola, A. Noumowé
Influence of the volume fraction and the nature of fine lightweight aggregates on the thermal and mechanical properties of structural concrete.
Construction and Building Materials, Vol. 51, 2014.

H. Soualhi, E.H. Kadri, T.T. Ngo, A. Bouvet, F. Cussigh, S. Kenai
²A vane rheometer for fresh mortar: development and validation ²
Applied Rheology, Pages 1-7, 2014.

 

2013

 D. Hoxha, J. Eslami, D. Grgic & D.-P. Do
Modeling Damage by Crack Nucleation and Growth in Porous Media.
Constitutive Modeling of Geomaterials - Springer Series in Geomechanics 715–721 (2013).doi:10.1007/978-3-642-32814-5_94

H.G. Nguyen, S. Ortola, E. Ghorbel
Micromechanical modelling of the elastic behaviour of polymer mortars. European Journal of Environmental and Civil Engineering, Volume 17, Issue 2, (2013) 65-83.

Z. Xing, R. Hebert, A-L. Beaucour, B. Ledesert, A. Noumowé
Influence of chemical and mineralogical composition of concrete aggregates on their behaviour at elevated temperature
.
Materials and Structures (2013) : 1-20, August, 2013.

 

2012

 S. André, N. Renault, Y. Meshaka & C. Cunat
From the thermodynamics of constitutive laws to the thermomechanical experimental characterization of a semicrystalline polymer from IR imaging.
Continuum Mechanics and Thermodynamics 24, 1–20 (2012).

S. Antit, H. Hassis & B. Fiorio
Flexural Strength of Laminated Waste Concrete—Normal Concrete Beams.
The Journal of Solid Waste Technology and Management 38, 103–116 (2012).

F. S. Barbosa, M. C. R. Farage, A.-L. Beaucour & S. Ortola
Evaluation of aggregate gradation in lightweight concrete via image processing.
Construction and Building Materials 29, 7–11 (2012).

A. S. E. Belaidi, L. Azzouz, E. Kadri & S. Kenai
Effect of natural pozzolana and marble powder on the properties of self-compacting concrete.
Construction and Building Materials 31, 251–257 (2012).

A. Belhaoua, J.-L. Gallias, N. Renault, V.-V. Bui & P. Faucon
Inspection of Railway Track Fastening Elements Using Artificial Vision.
Journal of Transportation research (2012).

B. Benabed, E.-H. Kadri, L. Azzouz & S. Kenai
Properties of self-compacting mortar made with various types of sand.
Cement and Concrete Composites 34, 1167–1173 (2012).

S. Bensebti, S. Aggoun, E.H. Kadri & O. Haddad
Experimental test for evaluation of SCC static segregation.
Advanced Materials Research 26, (2012).

O. Boukendakdji, E.-H. Kadri & S. Kenai
Effects of granulated blast furnace slag and superplasticizer type on the fresh properties and compressive strength of self-compacting concrete.
Cement and Concrete Composites 34, 583–590 (2012).

R. Bouras, A. Kaci & M. Chaouche
Influence of viscosity modifying admixtures on the rheological behavior of cement and mortar pastes.
Korea-Australia Rheology Journal 24, 35–44 (2012).

R. Coquard, B. Rousseau, P. Echegut, D. Baillis, H. Gomart, E. Iacona
Investigations of the radiative properties of Al–NiP foams using tomographic images and stereoscopic micrographs.
International Journal of Heat and Mass Transfer 55(5-6), 1606–1619 (2012).

A. Djoudi, M. M. Khenfer, A. Bali, E. H. Kadri & G. Debicki
Performance of date palm fibres reinforced plaster concrete.
International Journal of the Physical Sciences 7, 2845–2853 (2012).

J. Eslami, D. Hoxha & D. Grgic
Estimation of the damage of a porous limestone using continuous wave velocity measurements during uniaxial creep tests.
Mechanics of Materials 49, 51–65 (2012).

E. H. Kadri, S. Aggoun, S. Kenai & A. Kaci
The Compressive Strength of High-Performance Concrete and Ultrahigh-Performance.
Advances in Materials Science and Engineering 2012, 1–7 (2012).

M. Koabaz, N. Renault, P. Pliya & J.-L. Gallias
Characterization by the Impact-Echo Method of the High Temperature-Induced Damage on Concrete Specimens.
International Review of Civil Engineering (2012).

Z. Makhloufi, E. H. Kadri, M. Bouhicha & A. Benaissa
Resistance of limestone mortars with quaternary binders to sulfuric acid solution.
Construction and Building Materials 26, 497–504 (2012).

Z. Makhloufi, E. H. Kadri, M. Bouhicha, A. Benaissa & R. Bennacer
The strength of limestone mortars with quaternary binders: Leaching effect by demineralized water.
Construction and Building Materials 36, 171–181 (2012).

F. Meftah, S. Dal Pont & B. A. Schrefler
A three-dimensional staggered finite element approach for random parametric modeling of thermo-hygral coupled phenomena in porous media.
International Journal for Numerical and Analytical Methods in Geomechanics 36, 574–596 (2012).

T.-T. Ngo, E.-H. Kadri, F. Cussigh & R. Bennacer
Relationships between concrete composition and boundary layer composition to optimise concrete pumpability.
European Journal of Environmental and Civil Engineering 16, 157–177 (2012).

T.-D. Nguyen & F. Meftah
Behavior of clay hollow-brick masonry walls during fire. Part 1: Experimental analysis.
Fire Safety Journal 52, 55–64 (2012).

R. Siddique, K. Kapoor, E.-H. Kadri & R. Bennacer
Effect of polyester fibres on the compressive strength and abrasion resistance of HVFA concrete.
Construction and Building Materials 29, 270–278 (2012).

 

2011

F. S. Barbosa, A.-L. Beaucour, M. C. R. Farage & S. Ortola
Image processing applied to the analysis of segregation in lightweight aggregate concretes.
Construction and Building Materials 25, 3375–3381 (2011).

L. Bin, R. Bennacer & A. Bouvet
Evaporation of methanol droplet on the Teflon surface under different air velocities.
Applied Thermal Engineering 31, 3792–3798 (2011).

S. Dal Pont, F. Meftah & B. A. Schrefler
Modeling concrete under severe conditions as a multiphase material.
Nuclear Engineering and Design 241, 562–572 (2011).

K. Ezziane, E. H. Kadri & R. Siddique
Investigation of slag cement quality through the analysis of its efficiency coefficient.
European Journal of Environmental and Civil Engineering 15, 1393–1411 (2011).

H. Gomart & J. Taine
Validity criterion of the radiative Fourier law for an absorbing and scattering medium.
Physical Review E 83, 021202 (2011).

A. Itim, K. Ezziane & E. H. Kadri
Compressive strength and shrinkage of mortar containing various amounts of mineral additions.
Construction and Building Materials 25, 3603–3609 (2011).

A. Kaci, R. Bouras, V.T. Phan, P.A. Andréani, M. Chaouche & H. Brossas
Adhesive and rheological properties of fresh fibre-reinforced mortars.
Cement and Concrete Composites 33, 218–224 (2011).

A. Kaci, M. Chaouche & P.-A. Andréani
Influence of bentonite clay on the rheological behaviour of fresh mortars.
Cement and Concrete Research 41, 373–379 (2011).

A. Kaci, N. Ouari, G. Racineux & M. Chaouche
Flow and blockage of highly concentrated granular suspensions in non-Newtonian fluid.
European Journal of Mechanics - B/Fluids 30, 129–134 (2011).

E. H. Kadri, S. Kenai, K. Ezziane, R. Siddique & G. De Schutter
Influence of metakaolin and silica fume on the heat of hydration and compressive strength development of mortar.
Applied Clay Science 53, 704–708 (2011).

M. Kanéma, P. Pliya, A. Noumowé & J.-L. Gallias
Spalling, Thermal, and Hydrous Behavior of Ordinary and High-Strength Concrete Subjected to Elevated Temperature.
Journal of Materials in Civil Engineering 23, 921–930 (2011).

A. S. Kodjo, P. Rivard, F. Cohen-Tenoudji & J.-L. Gallias
Impact of the alkali–silica reaction products on slow dynamics behavior of concrete.
Cement and Concrete Research 41, 422–428 (2011).

A. Merdas, B. Fiorio & N. E. Chick
Etude de l’adhérence des joncs et des plats composites avec le béton par flexion (beam test).
Comptes Rendus de Mécanique 339, 743–814 (2011).

T.-T. Ngo, E. H. Kadri, F. Cussigh & R. Bennacer
Measurement and modeling of fresh concrete viscous constant to predict pumping pressures.
Canadian Journal of Civil Engineering 38, 944–956 (2011).

V.-H. Nguyen, S. Remond & J.-L. Gallias
Influence of cement grouts composition on the rheological behaviour.
Cement and Concrete Research 41, 292–300 (2011).

P. Pliya, A. Beaucour & A. Noumowé
Contribution of cocktail of polypropylene and steel fibres in improving the behaviour of high strength concrete subjected to high temperature.
Construction and Building Materials 25, 1926–1934 (2011).

B. Rousseau, H. Gomart, D. Zanghi, D. Bernard & M. Stampanoni
Synchrotron x-ray μ-tomography to model the thermal radiative properties of an opaque ceramic coating at T = 1000 K.
Journal of Materials Research 25, 1890–1897 (2011).

B. Rousseau, H. Gomart, D. De Sousa Meneses, P. Echegut, M. Rieu, R. Dugas, P. Lenormand, F. Ansart
Modelling of the radiative properties of an opaque porous ceramic layer.
Journal of Electroceramics (2) 27, 89–92 (2011).

M. Said-Mansour, E. H. Kadri, S. Kenai, M. Ghrici & R. Bennaceur
Influence of calcined kaolin on mortar properties.
Construction and Building Materials 25, 2275–2282 (2011).

R. Siddique, Y. Aggarwal, P. Aggarwal, E. H. Kadri & R. Bennacer
Strength, durability, and micro-structural properties of concrete made with used-foundry sand (UFS).
Construction and Building Materials 25, 1916–1925 (2011).

R. Siddique & E. H. Kadri
Effect of metakaolin and foundry sand on the near surface characteristics of concrete.
Construction and Building Materials 25, 3257–3266 (2011).

Z. Xing, A.-L. Beaucour, R. Hebert, A. Noumowé & B. Ledesert
Influence of the nature of aggregates on the behaviour of concrete subjected to elevated temperature.
Cement and Concrete Research 41, 392–402 (2011).

 

2010

 A. Alrifai, S. Aggoun, E.-H. Kadri, G. De Schutter & A. Noumowé
Influence of aggregate skeleton on shrinkage properties: validation of the model developed by Le Roy for the case of self-compacting concrete.
Materials and Structures 44, 949–959 (2010).

A. Bougara, E.-H. Kadri & K. Ezziane
Efficiency of granulated blast furnace slag replacement of cement according to the equivalent binder concept.
Cement and Concrete Composites 32, 226–231 (2010).

A. Bouvet, E. Ghorbel & R. Bennacer
The mini-conical slump flow test: Analysis and numerical study.
Cement and Concrete Research 40, 1517–1523 (2010).

B. Craeye, G. De Schutter, B. Desmet, J. Vantomme, G. Heirman, L. Vandewalle, Ö. Cizer, S. Aggoun & E.-H. Kadri
Effect of mineral filler type on autogenous shrinkage of self-compacting concrete.
Cement and Concrete Research 40, 908–913 (2010).

M. V. G. De Morais, P. Pliya, A. Noumowé, A.-L. Beaucour & S. Ortola
Contribution to the explanation of the spalling of small specimen without any mechanical restraint exposed to high temperature.
Nuclear Engineering and Design 240, 2655–2663 (2010).

J. Eslami, D. Grgic & D. Hoxha
Estimation of the damage of a porous limestone from continuous (P- and S-) wave velocity measurements under uniaxial loading and different hydrous conditions.
Geophysical Journal International 183, 1362–1375 (2010).

K. Ezziane, E.-H. Kadri, A. Bougara & R. Bennacer
Analysis of Mortar Long-term Strength with Supplementary Cementitious Materials Cured at Different Temperatures.
ACI, Materials Journal 107, 323–331 (2010).

H. Fares, S. Remond, A. Noumowé & A. Cousture
High temperature behaviour of self-consolidating concrete. Microstructure and physicochemical properties.
Cement and Concrete Research 40, 488–496 (2010).

A. Hallal, E. H. Kadri, K. Ezziane, A. Kadri & H. Khelafi
Combined effect of mineral admixtures with superplasticizers on the fluidity of the blended cement paste.
Construction and Building Materials 24, 1418–1423 (2010).

Y. Ke, S. Ortola, A.L. Beaucour, H. Dumontet
Identification of microstructural characteristics in lightweight aggregate concretes by micromechanical modelling including the interfacial transition zone (ITZ), Cement and Concrete Research, Volume 40, Issue 11, November 2010, p. 1590-1600

M. A. S. Mohamed, E. Ghorbel & G. Wardeh
Valorization of micro-cellulose fibers in self-compacting concrete.
Construction and Building Materials 24, 2473–2480 (2010).

T. T. Ngo, E. H. Kadri, R. Bennacer & F. Cussigh
Use of tribometer to estimate interface friction and concrete boundary layer composition during the fluid concrete pumping.
Construction and Building Materials 24, 1253–1261 (2010).

T.-T. Ngo, E.-H. Kadri, F. Cussigh, R. Bennacer & R. Duval
Practical Tribometer to Estimate Pumpability of Fresh Concrete.
Journal of Asian Architecture and Building Engineering 9, 229–236 (2010).

B. Rousseau, H. Gomart, D. Zanghi, D. Bernard, M. Stampanoni
Synchrotron X-ray µ-tomography to model the thermal radiative properties of an opaque ceramic coating at T=1000 K
Journal of Materials Research, 25(10), 1890-1897 (2010).

M.T. Ta, J.Y. Rolland, P. Echegut, B. Rousseau, M. Zaghrioui, F. Giovannelli, H. Gomart, P. Lenormand, F. Ansart
Prediction of thermal radiative properties (300–1000 K) of La2NiO4+δ ceramics
Applied Physics Letters 97, 181917 (2010).

G. Wardeh, M. A. Mohamed & E. Ghorbel
Analysis of concrete internal deterioration due to frost action.
Journal of Building Physics 35, 54–82 (2010).

 

2009

 K. Ezziane, E. H. Kadri, A. Hallal & R. Duval
Effect of mineral additives on the setting of blended cement by the maturity method.
Materials and Structures 43, 393–401 (2009).

A. Kaci, M. Chaouche, P.-A. Andreani & H. Brossas
Rheological behaviour of render mortars.
Appl. Rheol. 13794 (2009).doi:10.3933/ApplRheol-19-13794

A. Kaci, R. Bouras, M. Chaouche, P.-A. Andreani & H. Brossas
Adhesive and Rheological Properties of Mortar Joints.
Applied Rheology 51970 (2009).doi:10.3933/ApplRheol-19-51970

E.-H. Kadri, S. Aggoun & G. De Schutter
Interaction between C3A, silica fume and naphthalene sulphonate superplasticiser in high performance concrete.
Construction and Building Materials 23, 3124–3128 (2009).

E.-H. Kadri, R. Duval, S. Aggoun & S. Kenai
Silica Fume Effect on Hydration Heat and Compressive Strength of High-Performance Concrete.
ACI materials journal 106, 107–113 (2009).

Y. Ke, A.L. Beaucour, S. Ortola, H. Dumontet, R. Cabrillac
Influence of volume fraction and characteristics of lightweight aggregates on the mechanical properties of concrete, Construction and Building Materials, 23 (8), 2009, p. 2821-2828.

S. Malab, A. Benaïssa, S. E. Boudraa & S. Aggoun
Drying Kinetics of Self Compacting Concrete.
Turkish Journal of Engineering and Environment Sciences 33, 135–145 (2009).

R. Siddique, G. de Schutter & A. Noumowé
Effect of used-foundry sand on the mechanical properties of concrete.
Construction and Building Materials 23, 976–980 (2009).

A.-M. Tang, Y.-J. Cui, J. Eslami & P. Défossez
Analysing the form of the confined uniaxial compression curve of various soils.
Geoderma 148, 282–290 (2009).

 

2008

 S. Aggoun, M. Cheikh-Zouaoui, N. Chikh & R. Duval
Effect of some admixtures on the setting time and strength evolution of cement pastes at early ages.
Construction and Building Materials 22, 106–110 (2008).

S. André, C. Baravian, N. Renault & C. Cunat
In situ mechanical characterisation of polymers with the association of three optical techniques.
Applied Physic Letters 91, (2008).

C. Baravian, S. André, N. Renault, N. Moumini & C. Cunat
Optical techniques for in situ dynamical investigation of plastic damage.
Rheologica Acta 47, 555–564 (2008).

G. Casalino & E. Ghorbel
Numerical model of CO2 laser welding of thermoplastic polymers.
Journal of Materials Processing Technology 207, 63–71 (2008).

N. Chikh, M. Cheikh-Zouaoui, S. Aggoun & R. Duval
Effects of calcium nitrate and triisopropanolamine on the setting and strength evolution of Portland cement pastes.
Materials and Structures 41, 31–36 (2008).

E. Ghorbel
A viscoplastic constitutive model for polymeric materials.
International Journal of Plasticity 24, 2032–2058 (2008).

S. Haddadi, E. Ghorbel & N. Laradi
Effects of the manufacturing process on the performances of the bituminous binders modified with EVA.
Construction and Building Materials 22, 1212–1219 (2008).

S. Rémond, J. L. Gallias & A. Mizrahi
Characterization of voids in spherical particle systems by Delaunay empty spheres.
Granular Matter 10, 329–334 (2008).

S. Rémond, J. L. Gallias & A. Mizrahi
Simulation of the packing of granular mixtures of non-convex particles and voids characterization.
Granular Matter 10, 157–170 (2008).

N. Renault, S. André, D. Maillet & C. Cunat
A two-step regularized inverse solution for 2-D heat source reconstruction.
International Journal of Thermal Sciences 47, 834–847 (2008).

S. Saoula, H. Haddadi, E. Ghorbel & K. Ait Mokhtar
Improvement of the stability of a modified bituminous binders within EVA.
International Journal of Applied Engineering Research 3, 575–584 (2008).

P. Saxena, H. Toutanji & A. Noumowé
Failure Analysis of FRP-Strengthened RC Beams.
Journal of Composites for Construction 12, 2–14 (2008).

G. Wardeh & B. Perrin
Numerical modelling of the behaviour of consolidated porous media exposed to frost action.
Construction and Building Materials 22, 600–608 (2008).

G. Wardeh & B. Perrin
Freezing–thawing phenomena in fired clay materials and consequences on their durability.
Construction and Building Materials 22, 820–828 (2008).

Partager :